Ethernet and Cloud Server Setting in ZKTeco MiniAC
Ethernet IP address is your local Network IP which should has full internet access and able to communicate to your cloud server. To update the same click on menu icon from Device's Home screen first 
then select [COMM.] > [Ethernet] to set the network parameters. Now provide a local IP address to device with Subnet Mask, Gateway and DNS. If the TCP/IP communication of the device is successful, the icon 
will be displayed in the upper right corner of the standby device interface or Home screen of the device.
Cloud Server is your Timelabs server where you HRMS software is installed and where you want your devices to push the data. To update cloud server settings in your device click on Menu icon from Device's Home screen first
then select [COMM.] > [Cloud Server Setting]. Here enter cloud server's Public IP address or Host Name and Server port number that is configured on your cloud server for data communication. If the device communicates with the server successfully, the icon 
will be displayed in the upper right corner of the standby interface or Home screen of the device.
Refer sequence of snapshots for entering Ethernet setting and Cloud Server Setting in the device below:
Ethernet Setting in old ZKTeco Keypad Devices
Ethernet Configuration: Press M/OK to enter into the device menu, select Comm. > Ethernet to enter in the Ethernet setting interface. The parameters given here are the factory default values. Update a local IP Address along with Subnet Mask, Gateway and DNS address according to your network configuration.
